Trade starter pack
Concrete and masonry safety training starter pack
Ten training kits for crews who pour, cut, lay and finish. They cover the dust, the dig, the weight and the heat that come with the trade.
$39 instead of $90 one by one. You save $51.
- Instant download
- Secure checkout by Stripe
- 30-day refund, no questions
Concrete and masonry are hard on bodies. Cutting block and grinding slab throw fine dust into the air. Bags, block and wet barrows add up to a lot of lifting. Footings mean working in trenches, and pours mean trucks and machines backing in around people on foot.
This pack is for concrete contractors, masonry foremen and the labor crews who carry the load. It begins with the dust and the dig, since those hazards are quiet until they are not, then moves to equipment, the body and the weather. Every kit is cited to the OSHA paragraph, so your talk stands on the rule.
The 10 kits and why each one is in this pack
01
Crystalline silica
Cutting block, brick and slab with a saw or grinder sends out dust your crew can breathe in without noticing. This kit explains the health risk and the controls at the tool, giving the trainer the main talk for the whole trade.
02
Dust control
Dust does not stop at silica. Sweeping a pour area, mixing mortar and sanding patches all raise it. This kit shows the trainer how to move from dry habits to wet methods and vacuums, and why cleanup counts as much as cutting.
03
Trenching and excavation
Footings, foundation walls and utility tie-ins send concrete workers into the ground. This kit covers cave-in protection, spoil piles, ladders and daily inspections, so the foreman asks the right questions before anyone steps into a trench.
04
Respiratory protection
When controls cannot do the whole job, a respirator is the last line. This kit explains fit, medical evaluation and care for the person wearing one, and gives the trainer a way to show why a loose dust mask is not the same thing.
05
Working around heavy equipment
Mixer trucks, skid steers, pumps and loaders share a slab with people on foot who are watching the finish, not the machine. This kit covers blind spots, backing and swing zones, with a spotter routine for the pour.
06
Safe lifting and manual handling
Bags of mortar, block, rebar and wet forms are heavy and awkward. This kit gives the trainer a way to teach lift planning, partner carries and stacking that stays put, so the crew stops treating weight as a test of pride.
07
Back injury prevention
Years of bending over a footing or a wall add up. This kit goes past the single bad lift and talks about the daily habits that wear out a back, giving the trainer a plain script for stretching, posture and speaking up early.
08
Heat stress
Fresh concrete has to be finished on its own schedule, hot day or not. This kit helps the trainer cover warning signs, water, rest and shade for a crew that cannot just walk away from a pour.
09
Noise and hearing protection
Saws, breakers, mixers and compactors keep the noise up most of the day. This kit shows the trainer how to talk about hearing protection and the slow, painless way hearing is lost, which is why young workers skip the plugs.
10
Hand and power tools
Trowels, hammers, grinders and demo saws all have a condition and a guard to check. This kit closes the pack with the daily tool check, because a cracked handle or a missing guard on a grinder shows up when the work is moving fastest.
How to use the pack
Start with silica and dust control in the first two weeks, since the habits take longest to change. Then rotate through the rest of the kits at the weekly meeting, and match heat stress to the hot months. Keep the sign-in sheets from each session and hand out certificates when the quiz is done.
- 10 full training kits for the trade (editable PowerPoint, trainer guide, quiz, sign-in sheet, certificate)
- English and Spanish in every kit
- A one-page poster per topic
- Fill in your crew: audit-ready records in 60 seconds