Training kit, $9
Working at heights training PowerPoint
An editable 34-slide PowerPoint to run working at heights training in about 45 minutes, with trainer notes, a trainer guide, a 10-question quiz, a sign-in sheet and a certificate. In English and Spanish.
- Instant download
- Secure checkout by Stripe
- 30-day refund, no questions

PREVIEW
Real slides from the deck
Six of the 34 slides, exactly as they open in PowerPoint. Tap one to see it larger.
What is in the kit
- 34-slide editable PowerPoint with trainer notes on every slide
- Trainer guide for a 45-minute class, with the agenda and the materials list
- 10-question quiz and answer key
- Crew handout with the dos and don'ts
- Sign-in sheet and certificate of completion
- Everything in English and Spanish, in one zip file
CONTENTS
What the slides cover, in order
The topics of the deck in the order you teach them, with the OSHA citation each slide carries. Then 10 quiz slides, one question each.
- Working at heights safety training
- What you will learn today
- Where falls happen on the job
- The rules
- When fall protection is required · 29 CFR 1926.501(b)(1)
- Check the surface and set up protection first · 29 CFR 1926.501(a)(2)
- Holes, skylights and wall openings · 29 CFR 1926.501(b)(4)(i)
- Covers that do their job · 29 CFR 1926.502(i)(3)
- Guardrails and hoist areas · 29 CFR 1926.502(b)(1)
- Personal fall arrest systems: how they must work · 29 CFR 1926.502(d)(16)(iii)
- Anchorages and connections · 29 CFR 1926.502(d)(15)
- Inspect before you use it · 29 CFR 1926.502(d)(21)
- Falling objects · 29 CFR 1926.501(c)
- Rescue after a fall · 29 CFR 1926.502(d)(20)
- Training and retraining · 29 CFR 1926.503(a)(1)
- Before you go up: step by step
- Harness and lanyard inspection, step by step · 29 CFR 1926.502(d)(21)
- Put it on, hook up, work, come down · 29 CFR 1926.502(d)(17)
- If someone falls: step by step · 29 CFR 1926.502(d)(19)
- Common mistakes and what to do instead
- Scenario: what is wrong on this roof?
- Scenario debrief
- Recap · 29 CFR 1926.501(b)(1)
- Sign in before you go
TRAINER GUIDE
How the class runs
The trainer guide splits the 45 minutes like this. The notes on each slide say what to say.
| Minutes | What happens |
|---|---|
| 3 | Welcome, sign-in and what you will learn (slides 1 and 2) |
| 3 | Where falls happen on this job (slide 3) |
| 14 | The rules: trigger heights, surfaces, holes, covers, guardrails, fall arrest, anchorages, inspection, falling objects, rescue and training (slides 4 to 15) |
| 10 | Doing it right: planning, hands-on harness inspection, hook-up and rescue steps (slides 16 to 19) |
| 2 | Common mistakes (slide 20) |
| 5 | Scenario exercise in small groups, then the debrief (slides 21 and 22) |
| 1 | Recap (slide 23) |
| 6 | Quiz: 10 questions, then go over the answers (slides 24 to 33) |
| 1 | Closing: sign-in check, handouts and certificates (slide 34) |
What you need
- Slide deck on a screen or TV, or printed slides
- A full body harness, lanyard and connectors for the inspection demo
- A damaged or retired harness, tagged out of service, to show defects (optional)
- A sheet of plywood and a HOLE or COVER marking for the cover demo (optional)
- Your site rescue plan and emergency contact information
- Printed quizzes, the answer key and pens
- Crew handouts, one per worker
- Sign-in sheet and certificates of completion
Tips from the guide
- Point to real edges, holes and anchorages on today's job instead of talking in general terms.
- Have a worker inspect a harness out loud while the group watches and adds anything missed.
- When someone shares a near miss, thank them first, then ask what would have prevented it.
QUIZ
3 of the 10 quiz questions
Pick your answer, then open it. The kit's answer key has them all.
In general industry, when must a worker at an unprotected side or edge be protected from falling?
- Only above the second floor
- Only when using a ladder
- At 4 feet or more above a lower level
Show the answer
C. In general industry, protection is required at an unprotected side or edge 4 feet or more above a lower level.
In construction, which of these must never be used to tie off a personal fall arrest system?
- A roof anchor installed for fall arrest
- A beam anchor installed for fall arrest
- A guardrail system
Show the answer
C. Personal fall arrest systems must not be attached to guardrail systems.
A harness and lanyard stopped a worker's fall. What happens to them next?
- Hang them back up if they look fine
- Use them until the end of the job, then replace them
- Remove them from service until a competent person inspects them and clears them
Show the answer
C. Gear that took an impact load comes out of service right away until a competent person finds it undamaged and suitable for reuse.
PAPERWORK
Sign-in sheet, quiz and certificate
Ready to print. The certificate is a record of completion, not an OSHA card or license.

Sign-in sheet

Quiz

Certificate
WHO IT IS FOR
Who it is for and how long it takes
For the supervisor, foreman or safety lead who has to train a crew on working at heights and wants to walk in ready. The class takes about 45 minutes with the quiz. Run it in English or Spanish: the kit has both.
Used in: construction, general industry, manufacturing, oil and gas.
Only need a short talk? The 5-minute talk on this topic is free, in English and Spanish. Free working at heights toolbox talk
OSHA standards cited in the kit
Each citation points to the paragraph of the rule in the eCFR. This is how the kit writes them:
- 29 CFR 1926.501 Duty to have fall protection29 CFR 1926.501(b)(1) · 29 CFR 1926.501(a)(2) · 29 CFR 1926.501(b)(4)(i) · 29 CFR 1926.501(c)
- 29 CFR 1926.502 Fall protection systems criteria and practices29 CFR 1926.502(i)(3) · 29 CFR 1926.502(b)(1) · 29 CFR 1926.502(d)(16)(iii) · 29 CFR 1926.502(d)(15) · 29 CFR 1926.502(d)(21) · 29 CFR 1926.502(d)(20) · 29 CFR 1926.502(d)(17) · 29 CFR 1926.502(d)(19) · 29 CFR 1926.502(i)(4) · 29 CFR 1926.502(d)(23)
- 29 CFR 1926.503 Training requirements29 CFR 1926.503(a)(1)
- 29 CFR 1910.28 Duty to have fall protection and falling object protection29 CFR 1910.28(b)(1)(i)
- 29 CFR 1910.140 Personal fall protection systems29 CFR 1910.140(c)(18)
Working at heights training kit
$9
Pay once and download right away. No subscription. If it does not work for you, you get a refund within 30 days, no questions asked. Refund policy