Training kit, $9
Welding safety training PowerPoint
An editable 31-slide PowerPoint to run welding safety training in about 40 minutes, with trainer notes, a trainer guide, a 10-question quiz, a sign-in sheet and a certificate. In English and Spanish.
- Instant download
- Secure checkout by Stripe
- 30-day refund, no questions

PREVIEW
Real slides from the deck
Six of the 31 slides, exactly as they open in PowerPoint. Tap one to see it larger.
What is in the kit
- 31-slide editable PowerPoint with trainer notes on every slide
- Trainer guide for a 40-minute class, with the agenda and the materials list
- 10-question quiz and answer key
- Crew handout with the dos and don'ts
- Sign-in sheet and certificate of completion
- Everything in English and Spanish, in one zip file
CONTENTS
What the slides cover, in order
The topics of the deck in the order you teach them, with the OSHA citation each slide carries. Then 10 quiz slides, one question each.
- Welding safety training
- What you will learn today
- The hazard: heat, sparks and fumes in one spot
- Rule group 1: clear the area · 29 CFR 1926.352(a)
- Rule group 2: general industry distance and permit · 29 CFR 1910.252(a)(2)(vii)
- Rule group 3: fire watch · 29 CFR 1926.352(e)
- Rule group 4: fumes and hazard communication · 29 CFR 1910.252(c)(1)(iv)
- Rule group 5: eyes, skin and shock · 29 CFR 1910.252(b)(2)(i)(A)
- Rule group 6: gas cylinders · 29 CFR 1926.350(a)(9)
- How to do it right: before you strike an arc · 29 CFR 1926.352(a)
- How to do it right: while you work
- How to do it right: when you finish · 29 CFR 1910.252(a)(2)(iii)(B)
- Hot work checklist
- Common mistakes
- Scenario exercise: torch cutting on an upper floor
- Scenario debrief: what should have happened · 29 CFR 1926.352(f)
- Recap
- Sign in before you go
TRAINER GUIDE
How the class runs
The trainer guide splits the 40 minutes like this. The notes on each slide say what to say.
| Minutes | What happens |
|---|---|
| 4 | Welcome, sign-in, objectives and the hazard |
| 12 | The rules: clearing the area, permits, fire watch, fumes, eyes and shock, cylinders |
| 7 | Doing it right: before, during and after the work, and the checklist |
| 2 | Common mistakes |
| 6 | Scenario exercise in small groups, then the debrief |
| 1 | Recap |
| 7 | Quiz: 10 questions, then go over the answers |
| 1 | Closing: sign-in check, handouts and certificates |
What you need
- Slide deck on a screen or printed slides
- Your site's hot work permit form or checklist
- A helmet, gloves and a fire extinguisher for show
- A gas cylinder cart or chain to show securing
- Printed quizzes, answer key and pens
- Crew handouts, one per worker
- Sign-in sheet and certificates of completion
Tips from the guide
- Hold the session near the work area and walk the crew through a real setup.
- Ask welders and fire watches to describe their jobs in their own words.
- Read the cited paragraph aloud when a rule is questioned.
QUIZ
3 of the 10 quiz questions
Pick your answer, then open it. The kit's answer key has them all.
In construction, what must be near the work area?
- Fire extinguishing equipment ready for instant use
- A radio
- A spare helmet only
Show the answer
A. Suitable fire extinguishing equipment must be in the work area, ready for instant use.
In general industry, where practicable, how far must combustibles be relocated from the work site?
- At least 35 feet
- One foot
- Only to the next table
Show the answer
A. Where practicable, all combustibles are relocated at least 35 feet from the work site.
What must the employer include for hazardous materials in fluxes, coatings, coverings and filler metals?
- Nothing, welders know them
- Access to labels and safety data sheets, and training under hazard communication
- Only a warning sign
Show the answer
B. Employees must have access to labels and safety data sheets and be trained under 1910.1200.
PAPERWORK
Sign-in sheet, quiz and certificate
Ready to print. The certificate is a record of completion, not an OSHA card or license.

Sign-in sheet

Quiz

Certificate
WHO IT IS FOR
Who it is for and how long it takes
For the supervisor, foreman or safety lead who has to train a crew on welding safety and wants to walk in ready. The class takes about 40 minutes with the quiz. Run it in English or Spanish: the kit has both.
Used in: construction, manufacturing, oil and gas.
Only need a short talk? The 5-minute talk on this topic is free, in English and Spanish. Free welding safety toolbox talk
OSHA standards cited in the kit
Each citation points to the paragraph of the rule in the eCFR. This is how the kit writes them:
- 29 CFR 1926.352 Fire prevention29 CFR 1926.352(a) · 29 CFR 1926.352(e) · 29 CFR 1926.352(f) · 29 CFR 1926.352(d)
- 29 CFR 1910.252 General requirements29 CFR 1910.252(a)(2)(vii) · 29 CFR 1910.252(c)(1)(iv) · 29 CFR 1910.252(b)(2)(i)(A) · 29 CFR 1910.252(a)(2)(iii)(B) · 29 CFR 1910.252(a)(2)(iv)
- 29 CFR 1926.350 Gas welding and cutting29 CFR 1926.350(a)(9)
- 29 CFR 1926.351 Arc welding and cutting29 CFR 1926.351(d)
Welding safety training kit
$9
Pay once and download right away. No subscription. If it does not work for you, you get a refund within 30 days, no questions asked. Refund policy