Skip to content
Español

Training kit, $9

Rigging safety training PowerPoint

An editable 31-slide PowerPoint to run rigging safety training in about 40 minutes, with trainer notes, a trainer guide, a 10-question quiz, a sign-in sheet and a certificate. In English and Spanish.

Read the free talk
Slide 1 of 31 of the rigging safety PowerPoint: Rigging safety training

PREVIEW

Real slides from the deck

Six of the 31 slides, exactly as they open in PowerPoint. Tap one to see it larger.

1 of 6

Slide 1 of 31 of the rigging safety PowerPoint: Rigging safety training

What is in the kit

  • 31-slide editable PowerPoint with trainer notes on every slide
  • Trainer guide for a 40-minute class, with the agenda and the materials list
  • 10-question quiz and answer key
  • Crew handout with the dos and don'ts
  • Sign-in sheet and certificate of completion
  • Everything in English and Spanish, in one zip file

CONTENTS

What the slides cover, in order

The topics of the deck in the order you teach them, with the OSHA citation each slide carries. Then 10 quiz slides, one question each.

  1. Rigging safety training
  2. What you will learn today
  3. The hazard: the load is only as safe as the rigging
  4. Rule group 1: inspect before use · 29 CFR 1926.251(a)(1)
  5. Rule group 2: markings and safe working load · 29 CFR 1926.251(a)(2)
  6. Rule group 3: when to retire a web sling · 29 CFR 1926.251(e)(8)
  7. Rule group 4: rig it right · 29 CFR 1926.251(c)(9)
  8. Rule group 5: hands, people and the load · 29 CFR 1926.251(c)(10)
  9. Rule group 6: signals and stop · 29 CFR 1926.1419(j)
  10. How to do it right: before the lift · 29 CFR 1926.251(a)(2)
  11. How to do it right: making the lift · 29 CFR 1926.251(c)(10)
  12. How to do it right: landing and removing gear
  13. Daily rigging checklist
  14. Common mistakes
  15. Scenario exercise: the steel pipe bundle
  16. Scenario debrief: what should have happened · 29 CFR 1926.251(a)(2)
  17. Recap
  18. Sign in before you go

TRAINER GUIDE

How the class runs

The trainer guide splits the 40 minutes like this. The notes on each slide say what to say.

Class agenda
MinutesWhat happens
4Welcome, sign-in, objectives and the hazard
12The rules: inspection, markings, retiring slings, rigging, hands and signals
7Doing it right: before the lift, making the lift, landing and checklist
2Common mistakes
6Scenario exercise in small groups, then the debrief
1Recap
7Quiz: 10 questions, then go over the answers
1Closing: sign-in check, handouts and certificates

What you need

  • Slide deck on a screen or printed slides
  • A sling, a shackle and a hook with a latch for a hands-on look
  • A damaged sling or photos of damage
  • Your site's rigging inspection checklist
  • Printed quizzes, answer key and pens
  • Crew handouts, one per worker
  • Sign-in sheet and certificates of completion

Tips from the guide

  • Bring real slings and let people handle them.
  • Ask riggers to describe the worst gear they have retired.
  • Read the cited paragraph aloud when a rule is questioned.

QUIZ

3 of the 10 quiz questions

Pick your answer, then open it. The kit's answer key has them all.

  1. What must rigging equipment show for its safe working load?

    1. Legible markings from the manufacturer
    2. A chalk mark
    3. Nothing, if the rigger knows it
    Show the answer

    A. Rigging must have permanent, legible markings showing the safe working load.

    29 CFR 1926.251(a)(2)

  2. How must slings be treated at the sharp edges of a load?

    1. Left bare
    2. Padded or protected
    3. Tied tighter
    Show the answer

    B. Slings must be padded or protected from the sharp edges of their loads.

    29 CFR 1926.251(c)(9)

  3. On crane work, who must rig materials when workers hooking, unhooking or guiding a load are in the fall zone?

    1. A qualified rigger
    2. Whoever is closest
    3. A visitor
    Show the answer

    A. The materials must be rigged by a qualified rigger.

    29 CFR 1926.1425(c)

PAPERWORK

Sign-in sheet, quiz and certificate

Ready to print. The certificate is a record of completion, not an OSHA card or license.

  • Sign-in sheet from the rigging safety kit

    Sign-in sheet

  • Quiz from the rigging safety kit

    Quiz

  • Certificate from the rigging safety kit

    Certificate

WHO IT IS FOR

Who it is for and how long it takes

For the supervisor, foreman or safety lead who has to train a crew on rigging safety and wants to walk in ready. The class takes about 40 minutes with the quiz. Run it in English or Spanish: the kit has both.

Used in: construction, manufacturing, oil and gas.

Only need a short talk? The 5-minute talk on this topic is free, in English and Spanish. Free rigging safety toolbox talk

OSHA standards cited in the kit

Each citation points to the paragraph of the rule in the eCFR. This is how the kit writes them:

Rigging safety training kit

$9

Pay once and download right away. No subscription. If it does not work for you, you get a refund within 30 days, no questions asked. Refund policy

See every training kit

Read the free talk first