Skip to content
Español

Training kit, $9

Process safety management training PowerPoint

An editable 32-slide PowerPoint to run process safety management training in about 40 minutes, with trainer notes, a trainer guide, a 10-question quiz, a sign-in sheet and a certificate. In English and Spanish.

Read the free talk
Slide 1 of 32 of the process safety management PowerPoint: Process safety management training

PREVIEW

Real slides from the deck

Six of the 32 slides, exactly as they open in PowerPoint. Tap one to see it larger.

1 of 6

Slide 1 of 32 of the process safety management PowerPoint: Process safety management training

What is in the kit

  • 32-slide editable PowerPoint with trainer notes on every slide
  • Trainer guide for a 40-minute class, with the agenda and the materials list
  • 10-question quiz and answer key
  • Crew handout with the dos and don'ts
  • Sign-in sheet and certificate of completion
  • Everything in English and Spanish, in one zip file

CONTENTS

What the slides cover, in order

The topics of the deck in the order you teach them, with the OSHA citation each slide carries. Then 10 quiz slides, one question each.

  1. Process safety management training
  2. What you will learn today
  3. The hazard: one release can hurt many people
  4. Does this apply to your unit? · 29 CFR 1910.119(a)(1)(ii)
  5. Rule group 1: process hazard analysis and information · 29 CFR 1910.119(e)(1)
  6. Rule group 2: operating procedures · 29 CFR 1910.119(f)(1)
  7. Rule group 3: training · 29 CFR 1910.119(g)(1)(i)
  8. Rule group 4: safe work practices and permits · 29 CFR 1910.119(f)(4)
  9. Rule group 5: management of change and pre-startup review · 29 CFR 1910.119(l)(3)
  10. Rule group 6: equipment integrity and incidents · 29 CFR 1910.119(j)(5)
  11. How to do it right: before the shift · 29 CFR 1910.119(f)(1)
  12. How to do it right: during the task · 29 CFR 1910.119(f)(1)
  13. How to do it right: reporting and emergencies · 29 CFR 1910.119(m)(2)
  14. Process safety checklist
  15. Common mistakes
  16. Scenario exercise: the pump that keeps tripping
  17. Scenario debrief: what should have happened · 29 CFR 1910.119(l)(3)
  18. Recap
  19. Sign in before you go

TRAINER GUIDE

How the class runs

The trainer guide splits the 40 minutes like this. The notes on each slide say what to say.

Class agenda
MinutesWhat happens
4Welcome, sign-in, objectives, the hazard and whether the standard applies
12The rules: hazard analysis, procedures, training, safe work practices, change and equipment
7Doing it right: before, during, reporting and checklist
2Common mistakes
6Scenario exercise in small groups, then the debrief
1Recap
7Quiz: 10 questions, then go over the answers
1Closing: sign-in check, handouts and certificates

What you need

  • Slide deck on a screen or printed slides
  • One of your unit's operating procedures to look at together
  • A blank permit form from your site
  • Your site's management of change form
  • Printed quizzes, answer key and pens
  • Crew handouts, one per worker
  • Sign-in sheet and certificates of completion

Tips from the guide

  • Use your own unit's procedure and permits as examples.
  • Invite operators and maintenance people to share how changes are handled.
  • Read the cited paragraph aloud when a rule is questioned.

QUIZ

3 of the 10 quiz questions

Pick your answer, then open it. The kit's answer key has them all.

  1. How often must the process hazard analysis be updated and revalidated?

    1. At least every five years
    2. Never
    3. Only after an accident
    Show the answer

    A. It is updated and revalidated at least every five years.

    29 CFR 1910.119(e)(6)

  2. What is required before an employee operates a newly assigned process?

    1. Nothing
    2. A short email
    3. Training in an overview of the process and its operating procedures
    Show the answer

    C. Each employee before being involved in operating a newly assigned process must be trained.

    29 CFR 1910.119(g)(1)(i)

  3. What must happen to deficiencies in equipment outside acceptable limits?

    1. They are corrected before further use, or in a safe and timely manner with safe operation assured
    2. They are ignored
    3. They are left for next year
    Show the answer

    A. The employer must correct deficiencies outside acceptable limits.

    29 CFR 1910.119(j)(5)

PAPERWORK

Sign-in sheet, quiz and certificate

Ready to print. The certificate is a record of completion, not an OSHA card or license.

  • Sign-in sheet from the process safety management kit

    Sign-in sheet

  • Quiz from the process safety management kit

    Quiz

  • Certificate from the process safety management kit

    Certificate

WHO IT IS FOR

Who it is for and how long it takes

For the supervisor, foreman or safety lead who has to train a crew on process safety management and wants to walk in ready. The class takes about 40 minutes with the quiz. Run it in English or Spanish: the kit has both.

Used in: oil and gas, manufacturing.

Only need a short talk? The 5-minute talk on this topic is free, in English and Spanish. Free process safety management toolbox talk

OSHA standards cited in the kit

Each citation points to the paragraph of the rule in the eCFR. This is how the kit writes them:

Process safety management training kit

$9

Pay once and download right away. No subscription. If it does not work for you, you get a refund within 30 days, no questions asked. Refund policy

See every training kit

Read the free talk first