Training kit, $9
Machine guarding training PowerPoint
An editable 38-slide PowerPoint to run machine guarding training in about 45 minutes, with trainer notes, a trainer guide, a 10-question quiz, a sign-in sheet and a certificate. In English and Spanish.
- Instant download
- Secure checkout by Stripe
- 30-day refund, no questions

PREVIEW
Real slides from the deck
Six of the 38 slides, exactly as they open in PowerPoint. Tap one to see it larger.
What is in the kit
- 38-slide editable PowerPoint with trainer notes on every slide
- Trainer guide for a 45-minute class, with the agenda and the materials list
- 10-question quiz and answer key
- Crew handout with the dos and don'ts
- Sign-in sheet and certificate of completion
- Everything in English and Spanish, in one zip file
CONTENTS
What the slides cover, in order
The topics of the deck in the order you teach them, with the OSHA citation each slide carries. Then 10 quiz slides, one question each.
- Machine guarding training
- What you will learn today
- The hazard: what moving machines can do · 29 CFR 1910.212(a)(1)
- Where machines can hurt you · 29 CFR 1910.212(a)(1)
- Rule: one or more methods of guarding · 29 CFR 1910.212(a)(1)
- Types of guards and safety devices · 29 CFR 1910.212(a)(1)
- Rule: guard the point of operation · 29 CFR 1910.212(a)(3)(ii)
- Rule: push sticks and jigs add to guards · 29 CFR 1910.212(a)(3)(iii)
- Rule: belts, pulleys, gears, chains and shafts · 29 CFR 1910.219(f)(3)
- Rule: keep power transmission equipment in shape · 29 CFR 1910.219(p)(1)
- Rule: construction tools and saws · 29 CFR 1926.300(b)(1)
- Rule: bench and pedestal grinders · 29 CFR 1910.215(a)(4)
- Rule: jams, cleaning and lockout · 29 CFR 1910.147(a)(2)(ii)
- Rule: training and who may run a machine · 29 CFR 1926.20(b)(4)
- PPE and clothing: what they can and cannot do · 29 CFR 1910.133(a)(1)
- Step by step: check the machine before you start · 29 CFR 1910.144(a)(1)(iii)
- Checklist: guards and controls each shift
- Step by step: clearing a jam · 29 CFR 1910.147(d)
- Step by step: when a guard is missing or broken · 29 CFR 1926.20(b)(3)
- Common mistakes and what to do instead
- Scenario exercise: the last hour of the shift
- Scenario: what should happen · 29 CFR 1910.147(a)(2)(ii)
- Recap: what to remember
- Thanks for your time. Please sign in.
TRAINER GUIDE
How the class runs
The trainer guide splits the 45 minutes like this. The notes on each slide say what to say.
| Minutes | What happens |
|---|---|
| 3 | Slides 1 and 2: welcome, sign-in sheet and goals |
| 5 | Slides 3 to 6: the hazard, danger points, guarding methods and types of guards |
| 13 | Slides 7 to 15: the rules on point of operation, hand tools, power transmission parts, construction tools, grinders, lockout, training and PPE |
| 9 | Slides 16 to 19: step by step, with a guard walk-around at a real machine |
| 2 | Slide 20: common mistakes |
| 5 | Slides 21 and 22: scenario exercise in small groups, then the debrief |
| 1 | Slide 23: recap |
| 6 | Slides 24 to 33: the crew answers the paper quiz, then go over each question |
| 1 | Slide 34: closing, sign-in sheet and handouts |
What you need
- Slides on a screen, or printed copies for each person
- Sign-in sheet
- 10-question quiz and answer key, one quiz per person
- Crew handouts and certificates
- Push sticks, push blocks or jigs used on site
- A lock and tag from the site's lockout kit, if your site uses lockout
- Access to one real machine for a guard walk-around, shut down and locked out
- A whiteboard or flip chart and markers
Tips from the guide
- Use the machines in your own shop or on your own job for every example.
- Do the walk-around with the machine shut down and locked out, and have the crew point to danger points with a pen, not a finger.
- Ask operators which guards slow them down. A guard that fights the job gets bypassed, so write it down and get it fixed or changed.
QUIZ
3 of the 10 quiz questions
Pick your answer, then open it. The kit's answer key has them all.
What is the point of operation on a machine?
- The area where work is actually performed on the material
- The main power switch
- The spot where the operator stands
- The motor and belt housing
Show the answer
A. The point of operation is the area on a machine where work is actually performed upon the material being processed.
In general industry, how often must power-transmission equipment be inspected?
- Only when a belt breaks
- At intervals not exceeding 60 days
- Only when an inspector visits
- Never, if it sounds normal
Show the answer
B. All power-transmission equipment must be inspected at intervals not exceeding 60 days and kept in good working condition at all times.
On a construction site, a saw is missing a required guard. What must happen?
- Use it carefully until a new guard arrives
- Tag it or lock its controls so it cannot be used, or physically remove it
- Let only experienced workers use it
- Tape cardboard over the blade
Show the answer
B. On construction sites, machinery that does not comply with the rules must be identified as unsafe by tagging or locking the controls to make it inoperable, or be physically removed.
PAPERWORK
Sign-in sheet, quiz and certificate
Ready to print. The certificate is a record of completion, not an OSHA card or license.

Sign-in sheet

Quiz

Certificate
WHO IT IS FOR
Who it is for and how long it takes
For the supervisor, foreman or safety lead who has to train a crew on machine guarding and wants to walk in ready. The class takes about 45 minutes with the quiz. Run it in English or Spanish: the kit has both.
Used in: manufacturing, general industry, warehousing.
Only need a short talk? The 5-minute talk on this topic is free, in English and Spanish. Free machine guarding toolbox talk
OSHA standards cited in the kit
Each citation points to the paragraph of the rule in the eCFR. This is how the kit writes them:
- 29 CFR 1910.212 General requirements for all machines29 CFR 1910.212(a)(1) · 29 CFR 1910.212(a)(3)(ii) · 29 CFR 1910.212(a)(3)(iii) · 29 CFR 1910.212(a)(3)(i)
- 29 CFR 1910.219 Mechanical power-transmission apparatus29 CFR 1910.219(f)(3) · 29 CFR 1910.219(p)(1)
- 29 CFR 1926.300 General requirements29 CFR 1926.300(b)(1)
- 29 CFR 1910.215 Abrasive wheel machinery29 CFR 1910.215(a)(4)
- 29 CFR 1910.147 The control of hazardous energy (lockout/tagout)29 CFR 1910.147(a)(2)(ii) · 29 CFR 1910.147(d) · 29 CFR 1910.147(a)(2)(ii)(B)
- 29 CFR 1926.20 General safety and health provisions29 CFR 1926.20(b)(4) · 29 CFR 1926.20(b)(3)
- 29 CFR 1910.133 Eye and face protection29 CFR 1910.133(a)(1)
- 29 CFR 1910.14429 CFR 1910.144(a)(1)(iii)
- 29 CFR 1926.304 Woodworking tools29 CFR 1926.304(d)
Machine guarding training kit
$9
Pay once and download right away. No subscription. If it does not work for you, you get a refund within 30 days, no questions asked. Refund policy