General industry (29 CFR 1910) · Subpart N: Materials handling and storage
OSHA 1910.176: Handling materials, general
29 CFR 1910.176 is titled "Handling materials, general". It is part of Subpart N (Materials handling and storage) of the general industry standards.
It has no paragraph that is mainly about training, but our talks cite it for what it requires on the job.
Official source: eCFR, 29 CFR 1910.176
TRAINING
Training requirements
This section has no paragraph that is mainly about training. It is listed here because our toolbox talks cite it.
TALKS
Toolbox talks and kits for this standard
Talks for this standard are being written now. Request a kit for this standard.
OFFICIAL TEXT
Full text: 29 CFR 1910.176
Official text of the federal regulation (public domain). Training paragraphs are shaded.
(a) Use of mechanical equipment. Where mechanical handling equipment is used, sufficient safe clearances shall be allowed for aisles, at loading docks, through doorways and wherever turns or passage must be made. Aisles and passageways shall be kept clear and in good repair, with no obstruction across or in aisles that could create a hazard. Permanent aisles and passageways shall be appropriately marked.
(b) Secure storage. Storage of material shall not create a hazard. Bags, containers, bundles, etc., stored in tiers shall be stacked, blocked, interlocked and limited in height so that they are stable and secure against sliding or collapse.
(c) Housekeeping. Storage areas shall be kept free from accumulation of materials that constitute hazards from tripping, fire, explosion, or pest harborage. Vegetation control will be exercised when necessary.
(d) [Reserved]
(e) Clearance limits. Clearance signs to warn of clearance limits shall be provided.
(f) Rolling railroad cars. Derail and/or bumper blocks shall be provided on spur railroad tracks where a rolling car could contact other cars being worked, enter a building, work or traffic area.
(g) Guarding. Covers and/or guardrails shall be provided to protect personnel from the hazards of open pits, tanks, vats, ditches, etc.
KEEP READING
More from Subpart N
- 29 CFR 1910.177 Servicing multi-piece and single piece rim wheels
- 29 CFR 1910.178 Powered industrial trucks
- 29 CFR 1910.179 Overhead and gantry cranes
- 29 CFR 1910.180 Crawler locomotive and truck cranes
- 29 CFR 1910.183 Helicopters
- 29 CFR 1910.184 Slings