Ir al contenido
English

Construcción (29 CFR 1926) · Subparte N: Helicopters, hoists, elevators, and conveyors

OSHA 1926.554: Overhead hoists

La norma 29 CFR 1926.554 se llama "Overhead hoists". Es parte de la subparte N (Helicopters, hoists, elevators, and conveyors) de construcción (29 cfr 1926).

No tiene un párrafo dedicado a la capacitación, pero nuestras charlas la citan por lo que exige en el trabajo.

El texto oficial de OSHA solo existe en inglés. Lo citamos tal cual.

Fuente oficial: eCFR, 29 CFR 1926.554

CAPACITACIÓN

Requisitos de capacitación

Esta sección no tiene un párrafo dedicado a la capacitación. Aparece aquí porque nuestras charlas la citan.

CHARLAS

Charlas y kits para esta norma

Estamos escribiendo las charlas para esta norma. Pide un kit para esta norma.

TEXTO OFICIAL

Texto completo: 29 CFR 1926.554

Texto oficial de la regulación federal (dominio público). Los párrafos de capacitación están sombreados.

(a) General requirements. (1) The safe working load of the overhead hoist, as determined by the manufacturer, shall be indicated on the hoist, and this safe working load shall not be exceeded.

(2) The supporting structure to which the hoist is attached shall have a safe working load equal to that of the hoist.

(3) The support shall be arranged so as to provide for free movement of the hoist and shall not restrict the hoist from lining itself up with the load.

(4) The hoist shall be installed only in locations that will permit the operator to stand clear of the load at all times.

(5) Air hoists shall be connected to an air supply of sufficient capacity and pressure to safely operate the hoist. All air hoses supplying air shall be positively connected to prevent their becoming disconnected during use.

(6) All overhead hoists in use shall meet the applicable requirements for construction, design, installation, testing, inspection, maintenance, and operation, as prescribed by the manufacturer.

(b) Specific requirements. [Reserved]

MÁS NORMAS

Más normas de la subparte N