Ir al contenido
Muestra gratis
English

Construcción (29 CFR 1926) · Subparte E: Personal protective and life saving equipment

OSHA 1926.100: Head protection

La norma 29 CFR 1926.100 se llama "Head protection". Es parte de la subparte E (Personal protective and life saving equipment) de construcción (29 cfr 1926).

No tiene un párrafo dedicado a la capacitación, pero nuestras charlas la citan por lo que exige en el trabajo.

Tenemos 1 charla gratis que explican esta norma a la cuadrilla, en inglés y español.

El texto oficial de OSHA solo existe en inglés. Lo citamos tal cual.

Fuente oficial: eCFR, 29 CFR 1926.100

CAPACITACIÓN

Requisitos de capacitación

Esta sección no tiene un párrafo dedicado a la capacitación. Aparece aquí porque nuestras charlas la citan.

CHARLAS

Charlas y kits para esta norma

TEXTO OFICIAL

Texto completo: 29 CFR 1926.100

Texto oficial de la regulación federal (dominio público). Los párrafos de capacitación están sombreados.

(a) Employees working in areas where there is a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns, shall be protected by protective helmets.

(b) Criteria for head protection. (1) The employer must provide each employee with head protection that meets the specifications contained in any of the following consensus standards:

(i) American National Standards Institute (ANSI) Z89.1-2009, “American National Standard for Industrial Head Protection,” incorporated by reference in § 1926.6;

(ii) American National Standards Institute (ANSI) Z89.1-2003, “American National Standard for Industrial Head Protection,” incorporated by reference in § 1926.6; or

(iii) American National Standards Institute (ANSI) Z89.1-1997, “American National Standard for Personnel Protection—Protective Headwear for Industrial Workers—Requirements,” incorporated by reference in § 1926.6.

(2) The employer must ensure that the head protection provided for each employee exposed to high-voltage electric shock and burns also meets the specifications contained in Section 9.7 (“Electrical Insulation”) of any of the consensus standards identified in paragraph (b)(1) of this section.

(3) OSHA will deem any head protection device that the employer demonstrates is at least as effective as a head protection device constructed in accordance with one of the consensus standards identified in paragraph (b)(1) of this section to be in compliance with the requirements of this section.

MÁS NORMAS

Más normas de la subparte E